The HC-A-IS checkweigher (IS-D for double lane) is a special machine configuration of the HC-A for weighing wobbly, cylindrical products (e.g. cans etc.) in an elaborate revolving weighing system with a high throughput at high speed.
The checkweigher is set up at any desired location next to the existing production line. Disconnecting the production line is not necessary.
For the elimination of faulty products a broad, verified selection of sort devices is available.
The use of high-tech Weigh Cells from Wipotec, which operate according to the principle of Electro-Magnetic Force Restoration (EMFR), guarantees optimal weighing results with the best technology.
High-precision weighing of tippy products
Single track and double track solution available
Efficiency improvement through simple and user-friendly controls
Flexible integration in production lines for more efficiency
|
Working height
|
700-850 / 800-950 / 900-1,050 mm
|
|
Gross weighing range
|
750-1,000 g
|
|
Min. calibration value
|
0.1 g-0.2 g
|
|
Standard deviation (1s) (1)
|
from 100 mg
|
|
Maximum performance (1)
|
Standard version 100 units/min | HC-A-IS-D 180 units/min
|
|
Nominal voltage; Nominal frequency
|
L1/N/PE 230 V/115 V; 50/60 Hz
|
|
Connected load
|
approx. 0.8 kVA - 1.0 kVA
|
|
Compressed air supply
|
6 bar approx. 40 NI/min Quality class 5/3/3 acc. with DIN ISO 8573-1
|
|
Intrinsic weight
|
Approx. 190 kg (standard machine)
|
1.Depending on product shape, product behaviour, ejection device, transport speed and ambient conditions.