HC - FL
More than just two single-interval scales: the 3-in-1 solution for greater throughput
The HC-FL catchweigher is a combination of two single-interval scales in line. Both scales work simultaneously and independently of each other. As soon as a parcel exceeds a certain length, both single-interval scales work together as a virtual third set of scales. The machine is ideal for applications where high belt speeds and top throughputs are required for products individually weighing up to 60 kg – perfect for the CEP sector.
The scales weigh precisely up to 11,000 parcels an hour at transport speeds of up to 2.9 m/s. The scales impress with firstclass performance and durability. More than 1,000 systems have been put into operation worldwide to date. The HC-FL from Wipotec is therefore setting new standards in its sector.
The construction principle offers around 60 % more throughput at the same speed compared to single-interval scales. Using two single-interval scales enables the shortest possible product gaps. The catchweigher can also weigh during acceleration and decelaration phases, and on ascending or descending slopes. The use of a high-tech weigh cell from Wipotec, which works on the principle of electro-magnetic force restoration (EMFR), guarantees the best technology for excellent weighing results.
Transport speeds up to 2.9 m/s Weighing range up to 60 kg Accuracy above +/- 50 g Two single-interval scales which, if required, can be combined to simulate a third set of virtual scales Low noise level not exceeding 65 dB Throughput increase of up to 60 % compared to single-interval scales Very good price/performance ratio Wipotec EMFR weigh cell for the best weighing results
|
Application |
CEP, mail order, intralogistics, industry |
|
Machine type |
HC-FL-2 |
|
Max. transport speed |
2.9 m/s |
|
Control cabinet voltage; operating voltage |
L1/N/PE; 230V/115V; 480V-380V |
|
Operating frequency |
50/60 Hz |
|
Working height (1) |
450-1.250 mm |
|
Weighing belt width |
800/900/1.000 mm |
|
Weighing belt length |
800/900/1,000/1,100/1,200/1,300/1,400/1,500/1,600 mm |
|
Protection class |
IP54 |
|
Min. calibration value (e) |
≥ 50 g |
|
Max. weighing range |
60 kg |
1. Other working heights by request
